New Products
Products that have been recently added to our selection can be found here.

ATC Add a Fuse CircuitATC PLUG

Limited Time Offer!!  
ATC PLUG
!
On Sale For a Limited Time!
The ATC fuse block extension plugs into an occupied or vacant fuse slot and turns it into two circuits.  Perfect for adding a circuit to an existing fuse block.  Holds 2 ATC fuses.  Includes an output wire for the added circuit with a butt splice on the end for easy circuit integration.

ATM Add a Fuse CircuitATM PLUG

Limited Time Offer!!  
ATM PLUG
!
On Sale For a Limited Time!
The ATM fuse block extension plugs into an occupied or vacant fuse slot and turns it into two circuits.  Perfect for adding a circuit to an existing fuse block.  Holds 2 ATM fuses.  Includes an output wire for the added circuit with a butt splice on the end for easy circuit integration.

2 Position AGU Fuse BlockGFDB2-AGU

GFDB2-AGU
!
2 position 24K hard plated gold AGU fuse distribution block.  Accepts up to a 4 gauge cable on the input side and distributes the power through two AGU fuse locations that accept up to an 8 gauge wire on each output.  Injection molded clear acrylic base and cover.

3 Position AGU Fuse BlockGFDB3-AGU

GFDB3-AGU
!
3 position 24K hard plated gold AGU fuse distribution block.  Accepts up to a 4 gauge cable on the input side and distributes the power through three AGU fuse locations that accept up to an 8 gauge wire on each output.  Injection molded clear acrylic base and cover.

4 Position AGU Fuse BlockGFDB4-AGU

GFDB4-AGU
!
4 position 24K hard plated gold AGU fuse distribution block.  Accepts up to a 4 gauge cable on the input side and distributes the power through four AGU fuse locations that accept up to an 8 gauge wire on each output.  Injection molded clear acrylic base and cover.

AGU Fuse - 5 Pack
!

24K Gold plated High Power performance series AGU Fuses available in amperages from 30 to 80 amps.  Pack of 5.  NOTE: These are the larger AGU fuses, not AGC Fuses.

Reversing Toggle Switch
!
DPDT (MOM)-OFF-(MOM)
20 amp DC Polarity reversing momentary - off - momentary toggle switch designed to switch the direction of the electrical current. Used in motor reversing applications such as lift gates, motor controls, tilt motors, and more.  Switch has 4 terminals: one for battery +, one for battery ground, and two for each wire going to the motor.  Available with push-on terminals and screw terminals.

3 oz. Di-Electric GreaseIBO5105

IBO5105
!
Technician grade di-electric grease with applicator tip.  Use di-electric grease on wire terminals, battery terminals, fuses, and other electrical connections to protect against corrosion.

ANL Fuse HolderANLFH

ANLFH
!
HOT NEW PRODUCT!!
High power ANL fuse holder with cover. Large diameter wire ports on each side can acept cable sizes up to 2/O. For use with ANL style fuses.

ANL Power Fuses
!
ANL fuses provide high current circuit protection in a small package. Available in amperage ratings from 80 amps to 300 amps.For use in ANL fuse blocks and holders.

Lead Free Battery Terminal01056

01056
!
Lead Free Replacement OEM Style Battery Terminal

Lead free battery terminal made of tin-plated brass.  5/16" stud allows for the easy connection of power accessories.  Includes two 5/16" ring lugs.  Factory replacement for many models of cars and trucks.

Wing Nut Battery Terminal
!
Epoxy Coated Universal Battery Terminals
Epoxy coated lead battery terminals are color coded for easy identification.  Wing nut and stud allow for the easy connection of one or more cables to your battery.  Great for a replacement battery terminal in your car or truck. Red stud is 3/8", Black stud is 5/16". Use Copper Lugs to attach cables.

Battery Terminal Protectors01253

01253
!
Felt type battery terminal protectors help to protect the battery terminal from the harmful effects of corrosion. Always replace the terminal protectors when you replace your battery terminals. Fits both side post, and top post batteries.  Includes two color-coded protectors.

LED Illuminated 12 Volt Round Rocker SwitchIBRRS

 
IBRRS
!
Introductory Sale Price
12 volt on-off single pole rocker switch fits a round hole for easy installation.  Long-life LED illumination available in 5 different colors.  Quick connect tabs for quick electrical connections.

Gold Plated ANL Power Fuses - 2 pack
!
High power ANL style fuses for use in high current circuit protection.  24K gold-plated connections for optimal conductivity.  Available in 100 amp, 150 amp, 200 amp, and 250 amp capacities.  Includes 2 fuses per package.

60 Amp AGU Fuse Holder With Status LEDFPC1G

FPC1G
!
Includes 60 amp fuse.
Water resistant AGU fuse holder with 1 foot 4 gauge power wire with 3/8'' eyelet.  24K gold-plated hardware, integral o-ring seals, and built-in status LED glows if the included 60 amp AGU fuse blows.b  For use with direct connections off of the battery or power source.

250 Amp ANL Fuse HolderFPC2G

FPC2G
!
Water resistant AGU fuse holder with 1 foot 1/O gauge power wire with 3/8'' eyelet.  24K gold-plated hardware, integral o-ring seals, and includes a 250 amp ANL fuse.  For use with direct connections off of the battery or power source.

Water Resistant ANL Fuse HolderPFBW1-ANL

PFBW1-ANL
!
Water resistant AGU fuse holder accepts up to a 1/O gauge power wire.  Includes 24K gold-plated hardware, integral o-ring seals, and clear acrylic housing.  For use with direct connections off of the battery or power source.

4 Port Digital Battery Terminal - PositivePBT10PM

PBT10PM
!
Integrated LED digital voltmeter to easily identify the current voltage status of your battery.  Platinum-look finish and 24K gold-plated hardware resists corrosion and includes a clear plastic cover.  Digital voltmeter has a separate power and ground wire that connect directly to your battery.  4 power distribution ports accomidate up to one 1/O gauge wire, one 4 gauge wire, and two 8 gauge wires.

4 Port Battery Terminal - NegativePBT10N

PBT10N
!
Platinum-look finish and 24K gold-plated hardware resists corrosion and includes a clear plastic cover.  Digital voltmeter has a separate power and ground wire that connect directly to your battery.  4 power distribution ports accomidate up to one 1/O gauge wire, one 4 gauge wire, and two 8 gauge wires.

4 Gauge Power Distribution BlockPDB2

PDB2
!
This power distribution block accepts up to a 4 gauge power cable for the input, and distributes that power out to 4 separate outputs that each accept up to a single 8 gauge wire.  24K gold-plated hardware for optimal electrical conductivity.  The platinum-look finish is resistant to corrosion.  Includes durable injection molded base and clear acrylic cover.

1/O Gauge Power Distribution BlockPDB4

PDB4
!
This power distribution block accepts up to a single 1/O gauge power cable for the input, and distributes that power out to 4 separate outputs that each accept up to a single 4 gauge wire.  24K gold-plated hardware for optimal electrical conductivity.  The platinum-look finish is resistant to corrosion.  Includes durable injection molded base and clear acrylic cover.

3 in 4 out ATC Fuse BlockATCFH

ATCFH
!

Clear polycarbonate molded base and cover allows easy viewing of fuses.  3 power input locations for flexability in establishing power connections, and 4 discrete outputs, one for each fuse.

80 Amp RelayR-80A

R-80A
!
High power surface mount relay capable of switching up to 80 amps at 12 volts DC.  Power connections utilize 5/16" ring terminals or lugs.  Relay coil connections are #10 studs.  Good choice for isolating power circuits such as motors, amplifiers, and more.

200 Amp Power RelayR-200A

R-200A
!
Hi power 12 volt relay capable of switching up to 200 amps.  Great relay for circuit or battery isolation, or any application where very high currents need to be switched,  Power connections utilize 5/16" studs, and coil connections utilize #10 studs.

ATM Mini Waterproof Fuse Holder
!
Waterproof MINI fuse holder for use with type ATM fuses.  Molded body with integrated cover to protect fuse.  Available with either 16 gauge wire or 12 gauge wire.

Chrome Handle LED Toggle Switch
 
!
On Sale for a Limited Time
SPST ON-OFF LED Illuminated Toggle Switch
LED tipped chrome handle illuminated toggle switch available in red, amber, green, and blue.  Mounts in a 1/2" hole.  Uses standard 1/4" push-on terminals for electrical connections.  Rated for 20 amps at 12 volts DC.

Paddle Style Illuminated Toggle Switch
 
!
On Sale for a Limited Time
SPST ON-OFF Illuminated Paddle Switch
Large colored translucent paddle style illuminated toggle switch capable of switching up to 20 amps of current at 12 volts DC. Fits into a round hole approximately 0.866". Electrical connections are made using a 0.187" push on terminal. Housing is made of nylon with an integrated bezel.

8 gauge to 22 Gauge Ratchet Crimper5023F

 
5023F
!
Special Introductory Offer
Professional grade ratchet crimping tool crimps insulated terminals from 8 gauge to 22 gauge in one tool.Ergonomic soft-grip handle with external easy access ratchet release.  Slotted crimping head maintains even and consistent crimp pressure across all gauge sizes.  Use of this tool will maintain UL certification on heat-shrink insulated terminals.  Hardened steel crimp head is color coded for various terminal sizes.

665 Pc HVAC/R Terminal Kit Packaged in a sturdy utility case 665 Pcs
6966F
!
665 Piece Electrical Kit
665 Pc HVAC/R Terminal Kit Packaged in a sturdy utility case 665 Pcs

Chrome 3 Hole Ignition Switch Panel2987F

Only  
2987F
!
New Product Special Offer!!
3 hole ignition switch panel features a 25 amp toggle switch with an aircraft-style red safety cover, a 12 volt indicator light, and a heavy duty 60 amp ignition push button with an integral rubber boot.  Safety cover prevents accidental engagement of toggle switch.  Metal faceplate features a polished chrome finish and engraved legends that will never wear off.  Mounting hardware not included.

Chrome 5 Hole Ignition Switch Panel2988F

Only  
2988F
!
New Product Special Offer!!
5 hole ignition switch panel features a 25 amp toggle ignition switch with an aircraft-style red safety cover, a 12 volt red indicator light, a 12 volt green indicator light, a 25 amp accessory toggle switch, and a heavy duty 60 amp ignition push button with an integral rubber boot.  Safety cover prevents accidental engagement of toggle switch.  Metal faceplate features a polished chrome finish and engraved legends that will never wear off.  Mounting hardware not included.

Heavy Duty Easy Stripper Automatic Wire Stripper
5020F
!
Heavy Duty Easy Wire Stripper.  Automatically adjusting wire stipper strips 24 gauge through 10 gauge wire.  Also crimps insulated and un-insulated wire terminals, and includes an inttegrated wire cutter.  Comfort grip handle for comfort, and engineered for long life.

Cigarette Lighter Adapter 1 Pc
2675H
!
Cigarette Lighter Adapter
Cigarette Lighter Adapter 1 Pc

Insultherm Spark Plug Boot 4 Pcs
4200T-4F
!
Insultherm Spark Plug Boot
Insultherm Spark Plug Boot 4 Pcs

Installers Box Kit6935F

 
6935F
!
Ultimate Installer Box
On sale For a Limited Time
With over 2500 pieces, nearly every commonly used wiring accessory is in one easy to use, easy to access box.